Technical specifications

Power requirements 100/240 VAC
Mains frequency 50/60 Hz
Power input 1000 W
Wet/dry milling Wet and dry
Weight 61 kg (135 lbs)
Weight with vacuum 74 kg (163 lbs)
Dimensions when closed (W x H x D) 662 x 441 x 544 mm (26 x 17.4 x 21,4 in.)
Storage temperature -40–70ºC (-40–158ºF)
Tool Changer 5 tool positions, automated
Spindle 100 000 rpm
Data connection Cat5 or Cat6 Ethernet cabling

Operating conditions
5–40ºC (41–104ºF)
0–80% relative humidity
maximum altitude 2000 meters (6,592 feet)

Minimum required clearances
Sides 102 mm (4 in.)
Rear 25 mm (1 in.)
Top 305 mm (12 in.)

Pressure and flow:
Constant 3.5–9.0 bar (50–130 psi)
Minimum 30 l/min (1 cfm)

Air purity:
Solid contaminants (class 3);
filtration level better than 5 μm for solids
Water content (class 4);
maximum pressure dew point +3 ºC
Total oil content (class 3);
maximum oil content 1 mg/m3